Skip to main content

Hitachi

Information & Control Platforms

Mount base

Product nameTypeMountable modulesWeight
PSCPUSTOPI/O
CPU mount base2 slotsHSC-1020112600 g
4 slotsHSC-1040114750 g
8 slotsHSC-10801181100 g
I/O mount base2 slotsHSC-1021112600 g
4 slotsHSC-1041114750 g
8 slotsHSC-10811181100 g
I/O mount base for
scan-type AI only
8 slotsHSC-12811181100 g
 
PS : Power supply module
 
ST : Station module
 
OP : Expanded memory or network module

Power supply modules

Product nameInput ratingTypeApplication
AC input100-120 VACLQV000Common for CPU and I/O mount base (2-, 4- or 8-slot)
AC/DC input
switchover
100 AC/DC,
110 V
LQV100Common for CPU and I/O mount base (2-, 4- or 8-slot)
DC input24 VDCLQV200Common for CPU and I/O mount base (2-, 4- or 8-slot)

CPU modules

ModelTypeSpecifications
Remote I/O
function
Computerization memoryCoprocessor for
floating point
arithmetic
Model-LLQP800NoneNo internal memory + expandable by 4 M bytesNone
Model-SLQP000InternalNo internal memory + expandable by 4 M bytesNone
Model-HLQP010Internal1 M byte internal + expandable by 3 M bytesNone
Model-FLQP011Internal1 M byte internal + expandable by 3 M bytesInternal
Model-DLQP120Internal2 M byte internal + expandable by 2 M bytesNone

Expanded memory modules (CPU option)

CapacityTypeSpecifications
1 M byteLQM000Expanded memory for computerization (SRAM), with correction capability for 1-bit errors

Network modules (CPU option)

Communication
type
Product nameTypeSpecifications
Ethernet *1ET.NETLQE020 /
LQE520
10 M bps, 10BASE5/10BASE-T,
TCP/IP + UDP/IP
Optical double
CPU link *2
OD.RING
(4 km)
LQE010 /
LQE510
Optical double ring type CPU link,
maximum clearance of 4 km between stations
OD.RING
(1 km)
LQE015 /
LQE515
Optical double ring type CPU link,
maximum clearance of 1 km between stations
SD.RING
(15 km)
LQE030 /
LQE530
Optical double ring type CPU link,
maximum clearance of 15 km between stations
SV.LINK *1SV.LINKLQE021 /
LQE521
Protocol high-speed I/O communication for Ethernet base alone
FL.net *3FL.NETLQE000 /
LQE500
Control network for Ethernet base
CPU.LINK
(electricity) *4
CPU.LINKLQE050 /
LQE550
Electrical system CPU link, 500 kbps
RS-232C *5RS-232CLQE160 /
LQE560
Rs-232C x 2 ports, 19.2 kbps maximum, non-procedure/H-7338 protocol switchover
RS-422 *5RS-422LQE165 /
LQE565
Rs-422 x 2 ports, 19.2 kbps maximum, non-procedure/H-7338 (with interrupt function)
JEMA-PC net
(master) *6
J.NETLQE040 /
LQE540
OPCN-1-compliant master station, 1 Mbps (240 m) to 125 kbps (1,000 m)
J.NET
(With interrupt)
LQE045 /
LQE545
J.NET with I/O interrupt task startup function
With interrupt RI/O *9IR.LINKLQE046 /
LQE546
Remote I/O master station with interrupt function
DeviceNet *7D.NET
(internal power supply)
LQE170 /
LQE570
There is a choice of DeviceNet master station, slave station, and peer station function,
500 kbps (125 m) to 125 kbps (500 m)
D.NET
(external power supply)
LQE175 /
LQE575
There is a choice of DeviceNet master station, slave station, and peer station function,
500 kbps (125 m) to 125 kbps (500 m)
 
*1 to *9 need parameterization software (optional), with *1 to *7 and *9 indicated in the programming software field.

I/O station modules

Communication
type
Product nameTypeSpecifications
Standard remote I/O
(station)
RI/OLQS000S10-system remote I/O station, 768 bps, total extension up to 300 m
JEMA-PC Net
(slave)
J.STATIONLQS020OPCN-1-compliant slave station, with RS-232C port
RI/O station with
innterrupt
IR.STATIONLQS021Remote I/O station with interrupt function
DeviceNet
slave station
D.STATIONLQS070DeviceNet slave station (station function)

Input and output module

TypeRated input/output specificationsTypeScoreExternal connectionInsulation
Digital
input
100-120 VACLQX13016Terminal
block
8 points
12-24 VDCLQX20016Terminal
block
8 points
LQX201
(for high speed)
16Terminal
block
8 points
LQX30032connector32 points
LQX35064connector32 points
Digital
output
Relay contact
100-220 VAC,
12-24 VDC/48 VDC,
100-110 VDC
LQY10016Terminal
block
8 points
LQY1408Terminal
block
Each point independent
Transistor
(sink output),
12-24 VDC
LQY20016Terminal
block
16 points
LQY30032connector32 points
LQY35064connector32 points
Digital
input /
output
mixed
Input : 12-24 VDC,
Output : Transistor
(sink output)
12-24 VDC
LQZ300Input 32
Output 32
connector32 points
Analog
input
-5 to +5 V /,
-10 to +10 V /,
+1 to +5 V
LQA0004Terminal
block
4 points
4 to 20mALQA1004Terminal
block
4 points
Resistance
temperature
Pt 100Ω(JPt 100Ω)
-100 to +100°C /,
-200 to +350°C /,
-200 to +500°C
LQA2004Terminal
block
4 points
Analog
output
-5 to +5 V /,
-10 to +10 V /,
+1 to +5 V
LQA5004Terminal
block
4 points
4 to 20mALQA6004Terminal
block
4 points
Pulse
counter
(UP&UP /
DOWN)
Input : 12-24 VDC,
2-phase/single-phase, STOP
Comparative output : 12-24 VDC
LQC0001Terminal
block
1 points
Scan-
type
analog
input
AD conversion module :
-5 to +5 V /, 12 bits
(one module on each unit)
LQA800
Scanner module : 4 points,
common insulation
LQA8104Terminal
block
4 points

Programming software (DOS/V-compatible Windows ® version)

Type Product name Type *10 Use
Programming
software
S10Tools system S-7890-01J For ladder and HI-FLOW
Ladder chart system S-7890-02J For ladder diagram
HI-FLOW system S-7890-03J For HI-FLOW
RPDP/S10 system S7891-10J For development environment for C language program
Cross C compiler MCP68K C language compiler software
CPMSE debugger system S-7890-07J For debugger for C language programs
Maintenance
software
CPMSE loading system S7890-05J For memory clear
Backup restore system S7890-09J For backup and restoration
Parameter setting
software
ET.NET system *1 S7890-29J For user parameterization
OD.RING system *2 S7890-28J For user parameterization
FL.NET system *3 S7890-30J For user parameterization
CPU LINK system *4 S7890-22J For user parameterization
External serial link system *5 S7890-24J For user parameterization
J.NET system *6 S7890-27J For user parameterization
D.NET system *7 S7890-31J For user parameterization
4 ch analog pulse counter system *8 S7890-23J For user parameterization
IR.LINK system *9 S7890-36J For user parameterization
 
*4 and *8 are unnecessary when an s10Tools system or a ladder diagram system is available.
*10
If the code affixed to the end of the ten models is a J, the model comes with a Japanese manual. If the code is E, the model comes with an English manual.