Skip to main content

Hitachi
Research & Development

Kinya NAKATSU, Ph.D. (Eng.)

Our leaders - Technology & Design

Kinya NAKATSU, Ph.D. (Eng.)

Senior Chief Researcher,
Hitachi, Ltd.

Profile

Kinya Nakatsu is currently a Senior Chief Researcher in the Center for Technology Innovation (CTI) – Controls, of the Research & Development Group of Hitachi, Ltd.

Nakatsu joined Hitachi Research Laboratory in 1994 after completing his master’s degree electrical engineering at Tokyo University of Science. He engaged in research for industrial equipment, rolling systems and railway power modules, automotive inverters, uninterruptible power supplies (UPS) and elevator systems, contributing to technology development for high-reliability low-loss power devices, high speed and high-current electric circuit implementation using eddy current, a CPU integrated system power device. He then pursued work in electro-motorization technology to promote decarbonization of automotive vehicles, developing a world-leading direct water-cooled power module that drastically improved the cooling performance of power devices, and implemented this in an inverter. This technology was widely adopted by automotive manufacturers, such as GM and Daimler, and is being used worldwide in hybrid electric vehicles (HEV). He then pursued research on high output power density inverters necessary for electric vehicles (EV), developing new technology such as thin-film insulating material with high thermal conductivity, friction stir-welding, and organic to inorganic material bonding, resulting in the world’s first direct water double-sided cooled power module that achieved a high power output density of 94.3kVA/L, 2.7 times that of conventional technology at the time. The technology developed was adopted by Audi and other manufacturers in 2019 and is contributing to technology development for decarbonization.

Nakatsu received his doctoral degree in Material Science from Ibaraki University in 2014. He is a member of IEEE, the Institute of Electrical Engineers of Japan (IEEJ), Society of Automotive Engineers of Japan (JSAE), and the Institute of Electronics, Information and Communication Engineers (IEICE). Nakatsu has contributed to over 14 scientific papers, and has over 90 patents in Japan and overseas.

Related links

Research interests

  • Power electronics
  • System control technology
  • Electrical systems and device packaging technology
  • High voltage conversion technology

Major publications

  1. T.Hirao, M.Onishi, Y.Yasuda, A.Namba, and K.Nakatsu, EV traction inverter employing double-sided direct-cooling technology with SiC power devices,” 2018 International Power Electronics Conference, May 2018.
  2. K.Nakatsu, “The past and future research and development of power electronics viewed from the industrial world,” IEEJ S18-2, 2018.
  3. A. Matsushita, R. Saito, T. Tokuyama, K. Nakatsu and T. Kimura, “An experimental study on the thermal performance of double-side direct-cooling power module structure,” PCIM Europe, 2016.
  4. K.Nakatsu, H.Miyazaki, S.Ryuichi and J.Ounuki, “Wiring implementation technology to reduce the inductance of the power module,” J-Jiep 18 [4], pp. 270-278, 2015.
  5. R.Saito, A.Matsushita, K.Tokuyama, K.Nakatsu and T.Kimura, “Enhanced flexibility of inverter design by applying 2 in 1 double side power module,” Proc. Automotive Power Electronics (APE), April 2015.
  6. T.Tokuyama, J.Kusukawa and K.Nakatsu, “Insulated metal substrate for power modules using anodic oxide film of aluminum,” IPEC Hiroshima, 21P3-11, pp. 2904-2909, 2014.
  7. K.Nakatsu and R.Saito, “The next-generation high power density inverter technology for vehicle,” IEEJ IPEC, pp. 1925-1928, 2014.
  8. K. Nakatsu, A. Nishihara, K. Sasaki, and R.Saito, “A novel direct water and double-sided cooled power module and a compact inverter for electrified vehicles,” EPE 2013 ECCE Europe, DS2h, 0192-epe, 2013.
  9. K.Nakatsu, K.Yahata, and R.Saito, “Development of direct sensing current sensor for automotive inverter,” IEEJ E, vol. 133, no. 11, pp. 337-343, 2013.
  10. K.Nakatsu, et al., “Next-generation inverter technology supporting eco-friendly vehicles,” Hitachi Review, vol. 61, pp. 254-258, 2012.
  11. K.Ide, K.Nakatsu, et al., “Power electronics component technology supporting green mobility,” Hitachi Review, vol. 60, pp. 310-315, 2011.
  12. K.Nakatsu, K.Yahata, M.Iwanaka and R.Saito, “Study of direct sensing current sensor for inverter,” IEEJ D, I-455, 2008.
  13. K.Nakatsu, Y.Sasaki and S.Ibori, “Study of conduction noise suppression effect by counter flux wiring and dV / dt control,” IEEJ D, no. 166, 2002.
  14. K.Nakatsu, et al., “A super compact inverter with a new concept power module,” PCIM JP, pp. 87-92, 1998.

Major Patent

  1. Japanese Patent JP03366192, Korea Patent P10-0457030, China Patent PZL96112612.4, Taiwan Patent P159925 : Wiring board and a power converting apparatus has been used it, by K. Nakatsu, H. Miyazaki, et al.
  2. Japanese Patent JP03648451, USP-P6486548, China Paten PZL98809188.7 : Power conversion device using semiconductor module, by K. Nakatsu, T. Ogawa, et al.
  3. Japanese Patent JP05323039, SP-P8376069, China Patent PZL200910142607.2, DE-P2149973 : Power converter, by K. Nakatsu, H.Suzuki, et al.
  4. Japanese Patent JP05557441, USP-P8946567, EP-P2346153, China Patent PZL200980105222.7: Power converter and an electric vehicle, by K. Nakatsu, H. Houzouji, et al.

Major awards

2019
62nd Best 10 New Products Award among many others
2018
The Science and Technology Promotion Foundation of Ibaraki, 28th Tsukuba Encouragement Prize winner
2015
MONOZUKURI.Nippon.Conference 13th Auto Parts Award of the Super Manufacturing Parts Award
1998
Japan Electrical Manufacturers' Association Electric Industrial Technology Achievement's Award